Lazer Lamps Triple-R 24 Elite - Gen 2 black

Triple-R series: LED spotlights
Developed based on the requirements from professional motorsports, the Triple-R Series LED headlights set a new standard. The headlights are available in five sizes ranging from four to 28 LEDs, each with 11 watts of power, and in three finishes. They feature all-aluminum housings in black and optional silver color schemes on some models, a Gore-Tex ventilation membrane and electronic temperature management that allows the individual LEDs to always operate in the optimal power range. The special vacuum-metallized reflectors further increase the optical efficiency. The front is made of almost indestructible polycarbonate.

The spot light emission has been optimized for maximum range in accordance with the requirements of rally and endurance motorsport, where driving takes place at very high speeds, by means of reflectors specially shaped for each individual LED. While the ST and T series headlights also illuminate the roadside directly in front of the vehicle, the Triple R headlights are optimized for range and only achieve maximum lateral illumination from about half the range. However, compared to the hybrid light emission of the ST and T series, this results in up to five times the brightness value at peak.

Due to the mounting position of the LEDs and the indirect radiation via the hat reflectors, there are fewer vertical changes in the light cone while driving. This results in better visibility in rain or fog compared to conventional headlights with LEDs in the center of the reflector. Careful tuning of the light temperature results in sharper contrast boundaries and improves visibility.

Triple-R Standard series
Triple-R Standard Series models, like the ST and T Series, use high intensity LEDs with 11 watt output.

Triple-R 24 Elite
LED Light Bar. Twenty-eight 11 watt LEDs. Range-optimized light distribution. For off-road use.

With a luminous flux of 27060 lumens, the Triple-R 24 headlight is as powerful as nine xenon spotlights or nearly 29 H4 halogen spotlights. The spot light distribution provides an excellent range of approximately 2352 meters.

The Triple-R 24 is not only designed for motorsports, but also as an off-road headlight. Compared to the T-24, it only radiates at greater distances. If necessary, however, the beam angle can be increased by mounting one or more attachment lenses. Each attachment lens covers 4 LEDs.

The spotlight has a width of 1,125 mm, a height of 73 mm and a depth of 103 mm. The weight is 4.14 kg.

It is mounted using either three sliding brackets that can be mounted on the top or bottom, or two side brackets. All brackets are included in the scope of delivery.

The connection cable has a length of 70 cm. A cable set (1L-HP-300) with switch, relay and fuse is included.

ECE approval
Triple-R 750 to Triple-R 1250 models are approved as driving lamps according to ECE regulations. Unique for an approved headlamp is the E-Boost technology implemented in Triple-R Elite models, an innovation first found in Lazer Lamps headlamps worldwide. Outside of public road traffic, the headlight can be switched to full power by plugging in the so-called Boost Cap. The range is then increased by up to 1500 meters, depending on the model. Due to the flexible configuration of the headlights, they can be used both as legal driving lights and as LED light bars. The installation of an additional light bar can be omitted.

The Triple-R headlights with position light are also approved as position lights and driving lights in accordance with ECE regulations.

Reed lenses
If required, the beam angle of the Triple-R headlights can be increased from 5° to 10° to 30°, depending on the model, with the attachment lenses called Reeded Lenses. This means that the headlamps can be used both on the road and off-road, for example, where a wider beam is required. If, for example, four headlights are mounted both horizontally and vertically as cornering lights on rally vehicles, then two reed lenses can be used to illuminate the dark zones resulting from the mounting.
The Reeded Lens is made of acrylic glass, covers 4 LEDs and is attached with clips. A gasket prevents dirt and water from getting between the attachment lens and the headlight glass. The Reeded Lens can also be mounted on headlamps with more than 4 LEDs, giving them a hybrid beam profile.

Available in the following versions:
- 5° - 10° Variable Horizontal
- 15° Horizontal
- 30° Horizontal
- 15° Vertical (for vertically mounted fixtures)

Yellow attachment lenses
Yellow light provides better visibility in fog, rain and snowfall. The reason for this is the approx. 15% reduction in self-glare due to the reduction of the short-wave blue and violet light components, as these are refracted more strongly than the longer-wave yellow light components.

The yellow attachment lenses are made of acrylic glass, cover 4 LEDs and are attached with four clips. A seal prevents dirt and water from getting between the attachment lens and the headlight glass. The attachment lenses can also be mounted on headlamps with more than 4 LEDs and then give them a hybrid beam profile, depending on the model mounted.

Available in the following versions:
- 0°
- 15° Horizontal

Mounting
The Lazer Easy Mount system allows the lamps to be mounted in three different ways: upright, suspended and sideways. The spotlights are waterproof according to IP67.

Warranty
Lazer Lamps provides a 5-year warranty on the spotlights.